Re: Getting started with OpenSSH

i think the line \/ on windows XP
 Read from socket failed: Connection aborted
is refering to a known bug in openssh read some back traffic of this list or
go check out cygwin's and opensshs stuff

----- Original Message -----
From: "Brian West" <bw@brianwest.com>
To: <ssh-l@erdelynet.com>
Sent: Thursday, May 29, 2003 6:04 AM
Subject: Getting started with OpenSSH

> I installed the NetworkSimplicity version of OpenSSH for Windows
> successfully on my home computer a few months back; at some point,
something
> happened (still haven't figured out what) and it stopped working. A
number
> of other things happened (router died, other problems), resulting in me
> doing a completely new clean install of WinXP Pro--three times. Finally
got
> it working otherwise, but after I used the instructions on erdelynet to
> install the cygwin method of OpenSSH onWindows, I get this:
>
> [westbd@limegreen]~:{39}:$ ssh -v localhost
> OpenSSH_3.6.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090702f
> debug1: Reading configuration data /etc/ssh_config
> debug1: Rhosts Authentication disabled, originating port will not be
> trusted.
> debug1: Connecting to localhost [127.0.0.1] port 22.
> debug1: Connection established.
> debug1: identity file /home/westbd/.ssh/identity type -1
> debug1: identity file /home/westbd/.ssh/id_rsa type -1
> debug1: identity file /home/westbd/.ssh/id_dsa type -1
> debug1: Remote protocol version 1.99, remote software version
> OpenSSH_3.6.1p1
> debug1: match: OpenSSH_3.6.1p1 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.6.1p1
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> Read from socket failed: Connection aborted
> debug1: Calling cleanup 0x41b2a0(0x0)
> [westbd@limegreen]~:{40}:$
>
> I tried another time just now and got this:
>
> [westbd@limegreen]~:{53}:$ ssh -v localhost
> OpenSSH_3.6.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090702f
> debug1: Reading configuration data /etc/ssh_config
> debug1: Rhosts Authentication disabled, originating port will not be
> trusted.
> debug1: Connecting to localhost [127.0.0.1] port 22.
> debug1: Connection established.
> debug1: identity file /home/westbd/.ssh/identity type -1
> debug1: identity file /home/westbd/.ssh/id_rsa type -1
> debug1: identity file /home/westbd/.ssh/id_dsa type -1
> debug1: Remote protocol version 1.99, remote software version
> OpenSSH_3.6.1p1
> debug1: match: OpenSSH_3.6.1p1 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.6.1p1
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> Read from socket failed: Connection reset by peer
> debug1: Calling cleanup 0x41b2a0(0x0)
> [westbd@limegreen]~:{54}:$ ssh -v localhost
> OpenSSH_3.6.1p1, SSH protocols 1.5/2.0, OpenSSL 0x0090702f
> debug1: Reading configuration data /etc/ssh_config
> debug1: Rhosts Authentication disabled, originating port will not be
> trusted.
> debug1: Connecting to localhost [127.0.0.1] port 22.
> debug1: Connection established.
> debug1: identity file /home/westbd/.ssh/identity type -1
> debug1: identity file /home/westbd/.ssh/id_rsa type -1
> debug1: identity file /home/westbd/.ssh/id_dsa type -1
> debug1: Remote protocol version 1.99, remote software version
> OpenSSH_3.6.1p1
> debug1: match: OpenSSH_3.6.1p1 pat OpenSSH*
> debug1: Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.6.1p1
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> Read from socket failed: Connection aborted
> debug1: Calling cleanup 0x41b2a0(0x0)
> [westbd@limegreen]~:{55}:$
>
> I think I followed the instructions properly, but maybe not. Any idea
what
> I'm doing wrong? Thanks for your help.
>
> Brian West
> Johnson City, Tennessee
>
> --
> List Information: http://tech.erdelynet.com/mailman/listinfo/ssh-l/
> List Archives: http://erdelynet.com/archive/ssh-l/
> To Unsubscribe: Go to http://tech.erdelynet.com/mailman/listinfo/ssh-l/
and enter your email address at the bottom to "Edit Options". If you don't
know your password, have it emailed to you. Then unsubscribe.
>

--
List Information: http://tech.erdelynet.com/mailman/listinfo/ssh-l/
List Archives:    http://erdelynet.com/archive/ssh-l/
To Unsubscribe: Go to http://tech.erdelynet.com/mailman/listinfo/ssh-l/ and enter your email address at the bottom to "Edit Options". If you don't know your password, have it emailed to you. Then unsubscribe.